The Mighty Armory 9mm Gold Match Reloading Die Set includes four precision reloading dies including the Gold Match sizing decapping die, the flare expander die, the bullet seating die, and the Gold Match taper crimp die.
Prevent case bulge and size to SAAMI Spec standards. Results will be better than factory.
Each reloading die in the Gold Match series is precision machined from high-grade tool steel. Experience the ultimate consistency and concentricity for precision loading millions of cycles.
Mighty Armory 9mm Sizing Decapping Die: Sizes the case back to SAAAMI Spec angles and sets the case diameters to load performance rounds. Decap with the primer flicker spring to prevent pullbacks. Shaft and pins are high grade tool steel precision machined to ensure perfect concentricity to meet the demands required for optimal performance.
Mighty Armory 9mm Flare Expander Die: Flare the case mouth and expands the inside dimension of the case. Precision machined flare shaft at 60 Rockwell hardness with no inserts for perfect vertical alignment. Super smooth entry and exit will not stick the case. Prevent powder spillage. Tool free, easy adjustment.
Mighty Armory 9mm Seating Die: Achieve accurate and consistent Cartridge Overall Length. Eliminate case bulge and prevent bullet scarring with steel barrel bore, rather than stem. Steel barrel bore seats bullet with perfect vertical alignment and folds back the flare up to 80%.
Mighty Armory 9mm Taper Crimp Die: The finishing die that tapers the case crimp back to SAAMI Spec angle. Crimp matches spec sizing to provide consistent and uniform tension around the circumference of the bullet.
Lanolin-based Case Lube is recommended with use.
Mighty Armory utilizes a measured system. Using recommend measurements will make it easy for you to set up and load with precision, trouble free and tool free.
For loading 9mm:
- Size
- Set flare to .380 to .383 diameter
- Seat
- Crimp to .376 to .378 depending on bullet diameter
Multiple video and instruction resources are available.
Precision machined in the USA, Mighty Armory does not mass produce. The superior quality of these dies ensures multiple advantages for the every day volume reloader. Stay in spec after millions of rounds. Experience the consistency for your exacting standards.
Decapping & Hold Down Die Recommendations:
Depending on your reloading press, we recommend either the XM Series or Magnum / PUA decapping and swage dies.
For use with a Frank Ford Arsenal X-10 Autoprogressive Press and Similar:
For use with a Mark 7 Autodrive:
- Mighty Armory XMS Decapping Die
- Mighty Armory XMS Hold Dow Die
For use with a Single Stage or Turret Press:
- Mighty Armory Magnum or PUA Die
- Mighty Armory Magnum Swage Set
“See, Feel and Shoot the Difference”
- "World's Toughest" Reloading Dies
- Precision Reloading Tools
- Made in the USA
Mighty Armory
