INSTRUCTIONS

Step 1: Drop the shafted pin into the die body.

Step 2: Tighten the cap into the cap well with the spring. Strongly hand-tighten the cap.

Step 3: Lower the tool head or raise the ram.  

Step 4: Turn the die into the tool head until the mouth of the die contacts the plate or shell holder. Back out ¼ turn.  

Step 5: Turn locknut to lock it down.  

If you're using the standard shaft with pin, add a touch of vibratite or loctite to the pin threads first then snug with a 3/16 wrench. Do not over-tighten.