INSTRUCTIONS

Step 1: Clean the die bore before use. First with alcohol on a q-tip or paper towel. Then dry with a q-tip or paper towel.

Step 2: If sizing on a single stage or turret press, lube cases with imperial wax. If sizing on an autoprogressive press, use 6oz 91% alcohol and 1oz PEG75 lanolin. Spray cases, mix and let dry for 30 minutes.

Step 3: Turn the die into your press tool head until the mouth makes contact with your plate or shell holder. If you want to lengthen your headspace back the die out.

Step 4: Size a case and check your headspace length. If you want it deeper then turn the die down slightly and size the case.

Step 5: Once you find the sweet spot and you achieve the desired headspace for your chamber then lock the die into place.