INSTRUCTIONS

Step 1. Remove the shaft from the die body. Turn the pin into the shaft.

Step 2. Add a touch of purple VIBRA-tite 111 to the shoulder of the shaft and pin. Snug it with a 3/16th wrench. Do not over-tighten the pin or could result in snapping the shaft.

Step 3. Screw the nylon nut all the way onto the shaft. Turn the shaft all the way down into the die. Hand tighten.

Step 4. Set the decapping die into the tool head deep enough to decap your cases.

Step 5. Add the optional reducer bushing for 1.25" to 1.5" tool heads.