Mighty Armory TNT GOLD MATCH Decapping Kit for all Pistol Sizing Dies

• Mighty Armory primer flicker cap
• O-ring
• Primer flicker spring
• Mandrel expander shaft
• One (1) M2 hardened steel .078 decapping pin

What is a spring loaded primer flicker?

Mighty Armory's reloading die designs are tool-free. Simply install your pin on the shaft (with vibratite 111). Dropt the shaft into the die body. Set the sprig into the threaded well above the shaft, then screw on the posted cap backing it out 1/4 turn before use. As you decap and the pin hits the primer, the pin and shaft will rise approximately 0.010 before it reaches a stop point. Once the primer is punched out, the spring will rebound, which pressures the shaft back down. This results in the action required to flick the primer off the tip of the pin and send it through the shoot at high speed. This will prevent primer pull-back and will also prevent primers from clogging in your press shoot. Listen for the snap!

Click here for more frequently asked questions